
Ag
GPS RTK Base GPS Receiver User Guide 29
Setup Guidelines 4
The GPS antenna included with the AgGPS RTK Base 450/900 receiver
is a Trimble Zephyr Geodetic
™
Model 2 antenna. The Zephyr Geodetic
Model 2 antenna has a large ground plane to eliminate multipath and
can be used in both fixed (permanent) installations and mobile base
station applications.
Base station setup guidelines
For good performance, observe the following base station setup
guidelines:
• Place the GPS antenna in a location that has a clear line of sight
to the sky in all directions. Do not place the GPS antenna near
vertical obstructions such as buildings, deep cuttings, fences,
towers, or tree canopy.
• Mount the GPS antenna securely to minimize movement of the
antenna. Any movement of the base station GPS antenna will
cause corresponding movement in the rover.
• Place the GPS and radio antennas as high as practical. Radio
antenna height is a significant factor in the broadcast range of
the radio.
Note – The GPS antenna must have a clear line of sight to the sky at all
times during operation.
• Choose the most appropriate radio antenna for the desired
coverage area. The higher the gain on the antenna, the longer the
range. If there is more focus on the transmission signal, there is a
reduced coverage area. A 3 dB or 5 dB gain antenna provides a
mix of good range and reasonable directional coverage.
Comentários a estes Manuais