RightWay GPS Navigator RW 430 Guia do Utilizador descarregar pdf (Página 39)

GPS RTK Base GPS Receiver User Guide 37

Setting up the Receiver 5

Note – "Tx" indicates that the radio transmits corrections. "Rx" indicates

that the receiver receives corrections. "Tx/Rx" indicates that the radio both

transmits and receives corrections.

If the AgGPS RTK Base receiver does not have an internal transmit

radio, or you want to connect to higher power or to a secondary

external transmit radio or cellular modem, use the 26-pin port, the

Lemo port, or Bluetooth wireless technology.

The AgGPS RTK Base receiver supports the following Trimble base

radios:

• TRIMMARK

™

3 radio

• Trimble SNB900 radio

• Trimble PDL450 radio

• Trimble HPB450 radio

When used with an AgGPS RTK Base receiver, most external radios

require an external power source. Only the Trimble SNB900 radio-

modem has an internal battery and does not require external power.

Configure the external radio separately, using either the configuration

program for the external radio or the radio display and keypad.

To configure the AgGPS RTK Base for RTK operation, follow the base

setup procedure to set the following parameters:

• Set the base station coordinates

• Enable the CMR+

™

corrections stream on the selected serial port.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 93 94

Sem comentários

RightWay GPS Navigator RW 430 Guia do Utilizador Página 39