RightWay GPS Navigator RW 430 Guia do Utilizador descarregar pdf (Página 47)

GPS RTK Base GPS Receiver User Guide 45

Configuring the Receiver Using the Keypad and Display 6

Setting the reference latitude, longitude, and height of the

base station

In the Base Latitude screen:

1. If the base station was set with a “Here” position, press

L to

continue. To edit the Base Latitude setting, press

G to start

editing and then use the

K and K arrows to change the value of

the character to edit.

2. The Base Longitude screen is used to change the reference

longitude of the base station. The base was set up with a “Here”

position, so press

L .

3. The Point Height screen is used to change the reference height of

the base station. The base was set up with a “Here” position, so

press

L .

4. Use the Antenna Type screen to select the type of antenna used

with the receiver. Press

G . When the antenna name begins to

flash, the receiver is in Edit mode and you can select an antenna.

5. Press

K  to scroll through the antenna models until Zephyr

Geodetic Model 2 appears.

6. Press

L to accept the change.

7. Press

L again. The Measured To screen appears. See next.

Measuring and changing the antenna height

In the Measured To screen:

1. Press

G . When the antenna measurement method begins to

flash, the receiver is in Edit mode and you can select an antenna

measurement method.

2. Press

K  to scroll through the measurement methods until APC

appears. Press

L to accept the change.

3. Press

L .

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 93 94

Comentários a estes Manuais

Sem comentários

RightWay GPS Navigator RW 430 Guia do Utilizador Página 47

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de navegação RightWay GPS Navigator RW 430