RightWay GPS Navigator RW 430 Guia do Utilizador descarregar pdf (Página 52)

7 Automatically Setting up a Mobile Base Station Using AutoBase Technology

GPS RTK Base GPS Receiver User Guide

AutoBase Warning

The AutoBase Warning, when enabled, prevents the receiver from

creating a new base station position and beginning operating as an RTK

base station when no previous base station position exists that

corresponds to the current position of the receiver.

When the AutoBase Warning is on, the receiver will not begin

transmitting RTK corrections from a base position (latitude, longitude,

and height) that is not a part of the GPS site calibration. When the

AutoBase Warning is off, the receiver begins transmitting RTK

corrections from a new base position. You need only turn on the

receiver the first time on a point, and you do not need to manually

configure the base station settings.

By default, the receiver has the AutoBase Warning turned on. The

receiver uses the AutoBase Warning setting to control how the receiver

performs when different criteria are met. You can turn the AutoBase

Warning on or off using the keypad and display. For more information,

see Configuring system settings, page 47.

Working with AutoBase technology

This section contains some example scenarios. In each section, there is

a step-by-step process that explains what you will experience in each

scenario.

Scenario One: First visit to a site with AutoBase Warning

turned off

The following actions occur when you set up the base station for the

first time on a new point and the AutoBase Warning is turned off:

1. You turn on the receiver.

2. The receiver begins tracking satellites.

3. The receiver determines the current position.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 93 94

Sem comentários

RightWay GPS Navigator RW 430 Guia do Utilizador Página 52